Team Losi Team Losi 69 Camaro 22S Drag Car, BL RTR, Summit: 1/10 2WD

Overview

Setting the standard in the industry for years, the Losi® 1969 Camaro Drag Car is the most competitive No Prep Drag Racing Ready-to-Run. With the popularity of No Prep Drag Racing exploding, Losi has once again taken it to the next level with a truly innovative design and the quality workmanship drivers expect. The 69 Camaro has been carefully crafted to give a classic look while still fitting into the rules and regulations set by the No-Prep Drag Racing scene. It has all the advantages of an aluminum chassis such as electronics protection, side impact guards, and a clean wire management system with plenty of 22S option parts. It’s designed with racers in mind with many outstanding features including officially licensed Mickey Thompson tires, limited travel oil filled front and rear shocks, low center of gravity rear shock tower, extended body mounts, optional heavy duty sway bar, adjustable weight front bumper, elevated transmission, adjustable turnbuckles, and a fully adjustable wheelie bar. You get an all-metal gear transmission for concrete dependability along with a Spektrum™ SLT3 transmitter and dual protocol receiver, Spektrum Firma™ 100 amp Smart ESC, and Spektrum Firma 6500kv brushless motor. From its unmistakable body, to rapid handling, everything about the Losi 1969 Camaro Drag Car is ready to provide racing thrills like nothing else.

Features
Spektrum™ Firma™ 100 Amp Smart ESC
Spektrum Firma 6500kv Brushless Motor
Spektrum SLT3 Transmitter and Dual Protocol Receiver
All new 22S aluminum chassis
Officially Licensed 1969 Chevrolet Camaro Body
Officially Licensed Summit Racing Trim Scheme (Available on the T1 version)
LED Lights
Mickey Thompson branded Large Rear Drag Racing Slicks
Mickey Thompson branded Low Drag, Front Tires
All Metal Gear Transmission
Elastomer Battery Straps
Full Adjustable Wheelie Bar
Aluminum Option Parts Available

Specifications

Approximate Assembly Time
No assembly required
Ball Bearings
Full Ball Bearing
Battery
Sold Separately
Body
Polycarbonate screen printed, 1.2mm thick
Brakes
Integral with ESC
Charger
Sold Separately
Chassis
3mm plate, 6061-T6 aluminum
Completion Level
Ready-To-Run
Drive Type
Forward/Brake/Reverse
Drivetrain
2WD
Front Track
9.9″ (252mm)
Gear Pitch
48P
Internal Gear Ratio
2.43:1
Motor Type
Brushless – Sensorless
Pinion
16T
Power Type
Electric
Product Height
6.6″ (168 mm)
Product Length
25.1″ (638 mm)
Product Width
11.08″ (281 mm)
Radio
Included
Rear Track
10.1″ (256.5mm)
Receiver
Included
Scale
1/10
Servos
Included
Shock Type
Oil-filled internal limited coil-over spring
Speed Control
Included
Spur Gear
84T
Suspension
Lower A-arm, Upper link
Vehicle Type
Drag Car
Wheelbase
13.1″ (333 mm)